A remodeled power-lift stacker from Multiton MIC Corp. handles light-duty applications that require power lift rather than power drive. The model SM 15/20 walk-behind stacker comes with either a single mast for 62-inch lift or a telescopic mast that reaches up to 130 inches.

The stacker's standard features include: hydraulic lifting/lowering using a high-pressure pump with a 1.5 kW motor; a built-in 10-amp automatic battery charger; a floor locking foot brake, and adjustable straddle legs and forks.

Stacker loads are supported by the rear-mounted casters and two 4-inch diameter, 1-3/4 inch-wide load wheels mounted at the end of the straddle legs. Maximum load capacity is 1,500 pounds for the SM15 and 2,000 pounds for the SM20 with a load center of 24 inches. Multiton MIC Corp. (804) 737-7400 www.multiton.com

IPL Products Ltd. next month will introduce its FlapNest 2115 container. IPL says that the FlapNest 2115 offers a 5-to-1 nesting ratio, which allows users to ship 6,000 nested units per 53-foot trailer. It features all-plastic hinges, which make for safer handling, longer life, and increased recycling value.

The container includes a patented, leak-resistant, attached lid to prevent contamination of the container's contents. The FlapNest 2115 also addresses ergonomic concerns with its deep, contoured handle, which provides easier access when nested. It is available in heights of 9 inches and 12 inches, with optional features such as solid and open container bottoms. IPL Products Ltd. (508) 351-6050 www.ipl-plastics.com

The latest edition of the National Motor Carrier Directory published by Transportation Technical Services (TTS) includes more than 23,000 individual U.S. trucking firms, including 2,600 that are new to the publication. Entries in the directory represent more than 1 million trucks and tractors and more than 2 million trailers.

Each carrier profile includes company contact information, DOT number, Standard Carrier Alpha Code (SCAC), annual revenues, commodities transported, and number and type of trucks, tractors and trailers. Listings also specify whether a carrier handles truckload or LTL, as well as whether it engages in common, contract and brokerage operations.

The print version is available for $395 plus $12 shipping and handling. It includes access to daily updates via TTS's Web site (www.fleetseek.com). Users may also order any part of the directory on CD-ROM at an additional cost. Transportation Technical Services (888) 665-9887 www.ttstrucks.com

The GS1930 self-propelled scissor lift from Genie incorporates built-in self-diagnostics that notify operators of possible fault conditions. It offers a variable-speed motor for extended battery and motor life. The lift also has proportional controls for lift and drive functions, large area platforms, and maneuverability in tight spaces.

Swing-out battery boxes and power modules allow easy access to components, making the scissor lift easy to service. Safety features include pothole guards, slip-resistant surface on deck platforms, and built-in lanyard attachments.

The GS-1930 lifts up to 500 pounds to a working height of 25 feet. It also features a 39-inch easy roll-out platform extension. Genie North America (425) 881-1800 www.genielift.com

Sato America Inc. has released an RFID upgrade kit for its CL408e (2) and CL412e (2) printers, which will enable them to produce so-called "smart" labels. Smart labels emit signals that allow bar code readers to decode data even if the label is not within the bar code reader's vision. They often are used for tracking assets in distribution.

The SATO RFID Kit enables those two printer models to generate a label while simultaneously programming the high-frequency chip inside a label. The kit consists of an interface card and a transmitter module and currently works with chips manufactured by Texas Instruments (TagIt) and Phillips (I-Code) that operate at a high frequency (in the 13.56 MhZ range). Sato America (704) 644-1650 www.satoamerica.com

LXE Inc. has introduced the MX1-IS, an ultra-rugged mobile handheld computer. Thanks to its Intrinsically Safe (I-Safe) approval rating, the unit can be used even in environments where explosive materials are kept.

The MX1-IS has many of the same features as LXE's popular MX1 handheld. To simplify the data-entry process, it can be ordered with a short, long, or advanced long-range integrated scanner. It also will be available with multiple keypad options, including a 60-key alphanumeric keypad.

The MX1-IS's productivity-improving power management system supports a full eight-hour shift. The unit features an industry-standard 486 processor and a ROM-DOS operating system. It supports 900MHz or 2.4GHz (802.11b) radio options and numerous terminal-emulation standards for easy integration with most Warehouse Management System (WMS) applications. LXE Inc. (770) 447-4224 www.lxe.com

The new 7.5-lb. triple-wall, corrugated nestable pallet from Protecta-Pack Systems is built to carry loads weighing up to 1,200 lbs. The model's light weight helps reduce truck and air transportation costs. The design can be used in a D-Series aircargo container, also offered by Protecta-Pak.

The base of the strong triple-wall corrugated deck is constructed with 12 plastic cones to eliminate moisture absorption from the bottom.

In addition, the cones allow the pallet to be nested, saving space when not in use. Protecta-Pack Systems (763) 540-9500 www.protecta-pack.com

Rebox Services Inc. of Girard, Ohio, recently launched a container reconditioning service for all types of tubs, bins, hoppers and boxes, including Flowmatic equipment, pallets, drop bottoms, platform and solid boxes, buckets and baskets. According to company officials, reconditioning can save up to 50 percent over the cost of replacing containers.

Rebox does a complete reconditioning to the customer's specifications. Services include repairing or replacing damaged legs, channels and doors; repairing fork holes; straightening; painting; stenciling; and restoring stackability. Original manufacturer's parts are used when possible. Leg caps and bottoms can be welded solid on request, and pick-up and delivery of containers also is available. Rebox Services Inc. (330) 545-6670

Software vendor AquiTec International has introduced SCM/e eWMS, a Web-based warehouse management solution. The application optimizes supply chain effectiveness and efficiencies by improving inventory accuracy, increasing inventory turns, improving order throughput, reducing response times, and enhancing productivity.

SCM/e eWMS features a mobile wireless application that works with various types of radio-frequency units. It also offers native interfaces for voice recognition, facilitates inbound ordering, and integrates receiving with financial systems.

Other package features include appointment scheduling, receiving validation and date/weight control, cross docking, directed putaway, slot allocation and real-time replenishment for forward pick locations, inventory control, and expiration-date control.

Because the product is Web-enabled, it can manage a high-volume distribution environment, produce direct labor-cost reductions in low-margin businesses, and be deployed across multiple warehouses with a single server installation. AquiTec International (312) 264-1900 www.aquitecintl.com