ISM June manufacturing report shows nice rebound from May

Coming off somewhat of a “down” month in May, the June Manufacturing Report on Business from the Institute for Supply Management (ISM) showed that manufacturing is indeed still on solid ground.

By ·

Coming off somewhat of a “down” month in May, the June Manufacturing Report on Business from the Institute for Supply Management (ISM) showed that manufacturing is indeed still on solid ground.

The ISM reported that the index it uses to measure the manufacturing sector—known as the PMI—was 55.3 in June, up 1.8 percent from May’s 53.5. May marked the first month in 2011 that the PMI did not exceed 60. But even though the last two months were below 60, manufacturing experts said it was likely the PMI would head down a little bit.

Any PMI reading 50 or higher represents economic growth. And despite the sequential decline, June is the 25th consecutive month economic growth has occurred in the overall economy and the 23d consecutive month economic activity in the manufacturing sector has occurred, according to the report.

New orders were up 0.6 percent at 51.6, and production saw a 0.5 percent gain at 54.5. Employment also was up at 59.9 for a 1.7 percent increase.

“The index at 55.3 is positive and welcome news,” said Bradley J. Holcomb, CPSM, CPSD, chair of the ISM Manufacturing Business Survey Committee, in an interview. “A number of people were predicting for a lower reading than that. This recovery in manufacturing has been sustained for 23 months now through thick and thin, and this is another indication of that positive trend.”

The strong employment reading in this report, said Holcomb, represents a very strong optimism and shows that manufacturers are willing to take on more staff and serves as a strong leading indicator of good things to come over the next two months.

Inventories also had a strong month with a 5.4 percent gain to come in at 54.1, while customer inventories were up 7.5 percent at 47.0.

This increase continues and “up and down ride” over the last five months or so, noted Holcomb, and remains in an acceptable range.

“The managing inventories—raw materials, commodities, and inputs to manufacturing—is occurring at an acceptable range and shows good inventory management discipline,” explained Holcomb. “I am not particularly concerned about inventory readings being up over 50 at this point, because of the fluctuation.”

Prices were down 8.5 percent in June, following a 9 percent decline in May for a cumulative 17.5 percent dip over the last two months.

Holcomb labeled this development as very good news.

“The drop-off in fuel has a lot to do with it,” he said. “Gas, oil and diesel helps directly with transportation but it also impacts other things. This is clearly welcome, but there is continuing concern about inflation and prices, with people looking for more relief going forward.”

Manufacturing: ISM reports sector cooling off after rapid growth through first 4 months of 2011
After four straight months of rapid growth in the manufacturing sector to kick off 2011, the Institute for Supply Management (ISM) reported today that overall activity was down somewhat in May.

Manufacturing strength continues in April, says ISM
While consumer spending is dragging somewhat due to increasing fuel prices, manufacturing growth shows no sign of stalling out based on data released today by the Institute for Supply Management (ISM).


About the Author

Jeff Berman, Group News Editor
Jeff Berman is Group News Editor for Logistics Management, Modern Materials Handling, and Supply Chain Management Review. Jeff works and lives in Cape Elizabeth, Maine, where he covers all aspects of the supply chain, logistics, freight transportation, and materials handling sectors on a daily basis. Contact Jeff Berman

Subscribe to Logistics Management Magazine!

Subscribe today. It's FREE!
Get timely insider information that you can use to better manage your entire logistics operation.
Start your FREE subscription today!

Latest Whitepaper
Making TMS an Enterprise Priority
To get the most out of a TMS investment, numerous parties across the organization should lend their expertise.
Download Today!
From the February 2017 Issue
As the new administration sends waves of uncertainly through the global trade community, this could be the best time ever for shippers to build an investment case for GTM. Here are five trends you need to watch if you’re about to put these savvy systems to work
Carrier Consolidation Keeps Shippers Guessing
Getting Value from the Cloud
View More From this Issue
Subscribe to Our Email Newsletter
Sign up today to receive our FREE, weekly email newsletter!
Latest Webcast
Advance your career with the fastest growing logistics certification – APICS CLTD
During this webcast presenters will give an overview of APICS and the new Certified in Logistics, Transportation and Distribution (CLTD) designation. Learn how the CLTD program can help you stay on top of current trends and advance your career.
Register Today!
EDITORS' PICKS
ASEAN Logistics: Building Collectively
While most of the world withdraws inward, Southeast Asia is practicing effective cooperation between...
2017 Rate Outlook: Will the pieces fall into place?
Trade and transport analysts see a turnaround in last year’s negative market outlook, but as...

Logistics Management’s Top Logistics News Stories 2016
From mergers and acquisitions to regulation changes, Logistics Management has compiled the most...
Making the TMS Decision: Ariens Finds Just the Right Fit
The third time is the charm for this U.S. manufacturer on the hunt for a third-party logistics (3PL)...