LM    Topics 

Lift trucks: The greening of Toyota


From fuel cells to new batteries to regenerative braking technologies, the lift truck industry is greening its products. That’s one of the key takeaways I learned while writing about the evolution of the lift truck for the August issue.

Toyota Industrial Equipment Mfg., number one on Modern’s list of the Top 20 lift truck suppliers for 2011, has a green manufacturing story to tell as well. It’s delivering what folks in the sustainability community call the triple bottom line. That’s when a green initiative is not only profitable for the company, it also creates a better work environment and is good for the community.

According to Tim Hollkamp, the manager of human resources at TIEM’s Indiana plant, and Ron Allen, TIEM’s environmental engineer, Toyota’s focus on environmental improvements began with ISO certification in 1999. Five years later, in 2004, TIEM decided to incorporate environmental-friendly practices into the manufacturing processes at its plant in Indiana.

“When we talk about sustainability,” says Hollkamp, “we’re really talking about utilizing the strengths of the Toyota system to pull in that environmental piece.”

One of the first goals was to become a zero landfill facility. That is a plant that is able to reuse or recycle all of its waste without sending anything to the landfill. Initially, this was done by sending all of the trash from the plant that used to go to the landfill to a waste-to-energy facility where it is burned to produce steam. In 2004, the first year of the initiative, TIEM diverted 956 tons of trash to the utility.

However, TIEM’s disposal costs went up, not down. That’s because the cost of transporting trash to the energy plant was more than the $28.50 per ton TIEM had been spending to send it to the landfill. “That, combined with our continual goal of reducing waste, got us to thinking about how we do things around here so we could reduce that cost,” Hollkamp says.

To do that, Toyota looked for ways to increase the amount of recyclables it was using.
Rather than put wooden pallets in the trash compactor, Toyota began to recycle them. Similarly, wherever possible, corrugated cartons and containers were replaced by RPCs that TIEM provided to its vendors. Another initiative replaced protective packaging, such as plastic bubble wrap and peanuts, with reusable packaging.

Other recycling efforts were revisited to increase the amount of aluminum cans, ink cartridges and paper products recycled.

For the initiative to be truly successful, TIEM believed it had to involve its suppliers and its associates on the floor. It made a simple offer to suppliers: TIEM would share some of the savings with any supplier that could help reduce its cost through green supply chain practices. That led one vendor to suggest that TIEM recycle the scrap metal shavings that fell to the floor in the welding department rather than sweep them into the trash.

To encourage associates to be more diligent about recycling, TIEM offered to donate the funds it received for recycling materials to local and national charities, such as the Make-A-Wish Foundation. Some charities have received thousands of dollars as a result.

The benefit to TIEM: By 2010, thanks to the efforts of suppliers and employees, TIEM was sending just 129 tons of waste to the energy plant.

As a result of the success with recycling, TIEM launched an energy and resource conservation initiative to reduce the amount of natural gas, electricity and water the plant uses every year. It also became a member of the Indiana Department of Environmental Management Partners For Pollution Prevention, an association of about 85 large corporations in the state. “Initially, we looked at this as an energy reduction program,” says Allen. “But, as we got into it, we also realized there was a CO2 reduction as well that could reduce our carbon footprint.”

One simple step was to turn off lights and equipment that weren’t needed overnight. In one year alone, TIEM saved $166,000 in energy costs and reduced its CO2 output by 3,911 tons. In 2006 and 2009, it was honored with the Indiana Governor’s Award for Environmental Excellence.

While going green is certainly one of those nice fuzzy things that businesses like to talk about, Allen believes it is also one of the keys to Toyota’s continued strength in the market. “We continue to set goals every year to reduce our usage of natural gas, electricity and water,” he says. “That’s not just part of a sustainability program. It’s part of increasing our profitability.”


Article Topics

Forklifts
Lift Trucks
Sustainability
TIEM
Toyota Material Handling
   All topics

Latest in Logistics

National diesel average, for week of April 22, is down for the second straight week
UPS reports first quarter earnings declines
LM Podcast Series: Assessing the freight transportation and logistics markets with Tom Nightingale, AFS Logistics
Investor expectations continue to influence supply chain decision-making
The Next Big Steps in Supply Chain Digitalization
Under-21 driver pilot program a bust with fleets as FMCSA seeks changes
Diesel back over $4 a gallon; Mideast tensions, other worries cited
More Logistics

About the Author

Bob Trebilcock's avatar
Bob Trebilcock
Bob Trebilcock is the executive editor for Modern Materials Handling and an editorial advisor to Supply Chain Management Review. He has covered materials handling, technology, logistics, and supply chain topics for nearly 30 years. He is a graduate of Bowling Green State University. He lives in Chicago and can be reached at 603-852-8976.
Follow Modern Materials Handling on FaceBook

Subscribe to Logistics Management Magazine

Subscribe today!
Not a subscriber? Sign up today!
Subscribe today. It's FREE.
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today.

April 2023 Logistics Management

April 9, 2024 · Our latest Peerless Research Group (PRG) survey reveals current salary trends, career satisfaction rates, and shifting job priorities for individuals working in logistics and supply chain management. Here are all of the findings—and a few surprises.

Latest Resources

Warehouse/DC Automation & Technology: Time to gain a competitive advantage
In our latest Special Digital Issue, Logistics Management has curated several feature stories that neatly encapsulate the rise of the automated systems and related technologies that are revolutionizing how warehouse and DC operations work.
The Ultimate WMS Checklist: Find the Perfect Fit
Reverse Logistics: Best Practices for Efficient Distribution Center Returns
More resources

Latest Resources

2024 Transportation Rate Outlook: More of the same?
2024 Transportation Rate Outlook: More of the same?
Get ahead of the game with our panel of analysts, discussing freight transportation rates and capacity fluctuations for the coming year. Join...
Bypassing the Bottleneck: Solutions for Avoiding Freight Congestion at the U.S.-Mexico Border
Bypassing the Bottleneck: Solutions for Avoiding Freight Congestion at the U.S.-Mexico Border
Find out how you can navigate this congestion more effectively with new strategies that can help your business avoid delays, optimize operations,...

Driving ROI with Better Routing, Scheduling and Fleet Management
Driving ROI with Better Routing, Scheduling and Fleet Management
Improve efficiency and drive ROI with better vehicle routing, scheduling and fleet management solutions. Download our report to find out how.
Your Road Guide to Worry-Free Shipping Between the U.S. and Canada
Your Road Guide to Worry-Free Shipping Between the U.S. and Canada
Get expert guidance and best practices to help you navigate the cross-border shipping process with ease. Download our free white paper today!
Warehouse/DC Automation & Technology: It’s “go time” for investment
Warehouse/DC Automation & Technology: It’s “go time” for investment
In our latest Special Digital Issue, Logistics Management has curated several feature stories that neatly encapsulate the rise of automated systems and...