Pallet market set to reach 1.3 billion units in 2017

By Bob Trebilcock, Editor at Large
July 09, 2013 - LM Editorial

“Sales of new and refurbished pallets will expand by 3.5% a year through 2017 to 1.3 billion units, valued at $16.9 billion.”

That was the lead sentence in the recent report on the market for pallets in North America from the Freedonia Group.

There were a few other important bullet points for pallet users from the report’s executive summary.
• Block pallets are expected to take a larger share of the market as a growing number of manufacturers replace stringer pallets with new block pallets.
• Plastic pallets have seen their strongest advances in percentage terms ever and will continue to record above average growth.
• Metal pallets will notch the biggest percentage gains of any of the three most common pallet types (wood, plastic, metal).
• The caveat: Both metal and plastic pallets represent a relatively small percentage of market share, so that the effect on overall pallet sales will be minimal. Wood pallets, for instance, account for more than 90% of the pallet market in terms of units, with plastic accounting for about 4% and metal accounting for less than 1% of the total number of pallets. Corrugated, molded wood pallets and pallets constructed of other alternative materials account for the remainder.

A variety of factors are driving overall pallet demand, regardless of the type of material, according to Zoe Biller, a Freedonia industry analyst and the author of the report.

“You’re seeing a recovering US economy and the larger trend of moving manufacturing capacity back to the US from off shore,” Biller said. “Those are the two most important macro trends.”

Biller identified important trends for each of the pallet types.

Wood: Although not highlighted in her report, Biller estimates that about 60% of wooden pallets are used and about 40% are new. Those percentages could shift in favor of new pallets going forward. That’s because the industry has been reporting a shortage of used quality used pallets, known as cores, for the last year or so. “The core shortage appears to be real and it is going to be part of what’s going on going forward,” Biller said. “But it should correct itself in the long term as end users buy new pallets that replenish the pool.”

Nearly two years ago, Costco announced that it was going entirely to a wooden block pallet. Biller believes Costco’s decision is a symptom of the overall trend towards block pallets rather than a driver. “Costco is part of a broader trend towards pallets that are easier to use, especially in an automated system or with pallet jacks,” Biller said. Block pallets fit both of those bills. She adds, “There’s also a bigger trend to turn products and processes that aren’t a core business to a third party and pallet management is definitely part of that trend.”

Plastic: The move towards plastic appears to be driven by companies that can control their pallet pools and take advantage of plastics’ longevity as well as “growing sanitation concerns related to wood pallets,” Biller said. “Food safety regulations may have something to do with it going forward.”

Metal: The metal pallet boom is a result of several factors. One is that users stopped buying metal pallets during the recession and got by with existing stocks. Now that the manufacturing economy is picking up, they need more metal pallets to meet demand.
What’s more, there are very few metal pallets relative to wood and even plastic pallets. Any pick up in demand will result in a large percentage increase in the number of pallets.

Asked if she was surprised by any of the results, Biller said she was surprised by how far the pallet market declined during the recession. “A big part of the market advance is the need to bring the number of pallets available for use to required levels,” she said.



About the Author

image
Bob Trebilcock
Editor at Large

Bob Trebilcock, executive editor, has covered materials handling, technology and supply chain topics for Modern Materials Handling since 1984. A graduate of Bowling Green State University, Trebilcock lives in Keene, NH. He can be reached at 603-357-0484 and .(JavaScript must be enabled to view this email address)


Subscribe to Logistics Management magazine

Subscribe today. It's FREE!
Get timely insider information that you can use to better manage your
entire logistics operation.
Start your FREE subscription today!

Recent Entries

Even though some of its key metrics dropped sequentially from August to September, the outlook for manufacturing over all remains strong, according to the most recent edition of the Manufacturing Report on Business issued today by the Institute for Supply Management (ISM).

Company officials said that these planned changes, which will take effect on January 4, 2015, will provide for increases in current pay rates and reduce the time it takes for its nearly 15,000 drivers to reach top pay scale.

While the economy has seen more than its fair share of ups and downs in recent years, 2014 is different in that it could be the best year from an economic output perspective in the last several years. That outlook was offered up by Rosalyn Wilson, senior business analyst at Parsons, and author of the Council of Supply Chain Management Professionals (CSCMP) Annual State of Logistics Report at last week’s CSCMP Annual Conference in San Antonio.

Matching last week, the average price per gallon of diesel gasoline dropped 2.3 cents, bringing the average price per gallon to $3.755 per gallon, according to the Department of Energy’s Energy Information Administration (EIA).

A number of key topics impacting the freight transportation and logistics marketplace were front and center at a panel at the Council of Supply Chain Management Annual Conference in San Antonio last week.

Article Topics

News · Materials Handling · Pallets · All topics

About the Author

Jeff Berman, News Editor
Jeff Berman is Group News Editor for Logistics Management, Modern Materials Handling, and Supply Chain Management Review. Jeff works and lives in Cape Elizabeth, Maine, where he covers all aspects of the supply chain, logistics, freight transportation, and materials handling sectors on a daily basis. Contact Jeff Berman.

Comments

Post a comment
Commenting is not available in this channel entry.


© Copyright 2013 Peerless Media LLC, a division of EH Publishing, Inc • 111 Speen Street, Ste 200, Framingham, MA 01701 USA