Warehouse & DC Management: RFID surges ahead

Proponents have changed the conversation and have started tagging at the item level in what the industry is now calling a “source-to-store” approach.
image
By Maida Napolitano, Contributing Editor
April 01, 2012 - LM Editorial

The RFID chatter is getting louder. After conducting successful pilots of item-level RFID initiatives, Walmart, then American Apparel, and now Macy’s, Bloomingdales, Dillards, and JCPenney have all announced plans to roll out EPC-enabled RFID technology at the item level in their stores this year. 

For the RFID industry, this turn of events has been electrifying. Not only are these premier retailers driving RFID adoption, but they’re also propagating the benefits of RFID throughout each of their supply chains. This, in turn, creates opportunities for significant process and usage standardization across the industry with the mass adoption of the technology.

Many have already jumped on the bandwagon. An October 2011 study of 58 suppliers and 56 retailers across North America, conducted by Accenture on behalf of the Voluntary Interindustry Commerce Solutions Association (VICS) and its Item-Level RFID Initiative (ILRI), reports that the technology is at a “tipping point” with more than 50 percent of retailers and suppliers already piloting or implementing item-level RFID within their organization.

Joe Andraski, president and CEO of VICS, has no doubt. “The technology has been around for a while, but it hasn’t been used extensively because we haven’t done a lot of extensive tagging—until now. Now we’re seeing this game change.”

Michael Liard, RFID director for VDC Research, has been keeping a close eye on the technology for 12 years and sees the technology itself rapidly evolving and maturing. “We’re seeing significant developments in terms of innovation, price points coming down, standards being ratified and passed, and use cases being solidified.”

Many credit the groundwork laid by Walmart and the DoD in 2004 where the focus was the EPC tagging of cases and pallets.

True, it might not have reached the levels of success they expected, but it became the foundation that proponents have used to change the conversation and start tagging at the item level in what the industry overall is calling a “source-to-store” approach.

Over the next few pages, we’ll dig deeper into the ramifications of the widespread use of item-level RFID. We’ll explore other current drivers of RFID in warehouses and DCs and look at why some remain skeptical.

More item-level tagging
Now with multiple pilots completed and full roll-outs on tap, the expected benefits of item level tagging have been well-documented. Inventory accuracy has improved to rates above 95 percent; the time required for workers to perform cycle counts in stores has decreased by up to 96 percent; and out-of-stock events have decreased by 50 percent.

According to Andraski, it’s the reduction in out-of-stock events that has been the biggest differentiator. “When a shopper goes to retailer X and the product’s not there, it’s a lost sale and it’s also a dissatisfied consumer.” In an RFID-enabled supply chain, shoppers would rather go to Macy’s or Bloomingdales where they know their favorite products are in stock.

This means more sales, which subsequently means more revenue to all trading partners within that chain. Andraski reports that research has shown increases in sales for stores with EPC tagging between 4 percent and 21 percent and averaging about 6 percent. “That’s huge,” he adds, “especially in this economy.” 

What does the adoption of item-level RFID tagging mean to the many warehouses and DCs that support these retailers and their suppliers? It means streamlining DC operations to fully leverage RFID’s value. It’s leveraging RFID’s ability to capture information on multiple items simultaneously and remotely, without line of sight. It’s checking an order without opening a carton. It’s automatically identifying and counting groups of pallets, cases, and items in one read where barcodes were previously used to manually scan them one at a
time. 

There is no bigger driver right now than the aforementioned item-level tagging initiated by apparel retailers. Though most of the tagging is limited to the supply chains of replenished apparel such as jeans, underwear, and socks, plans are underway to add more product categories. It’s especially straightforward in a closed-loop supply chain when the apparel manufacturer owns its supply chain from end-to-end. 

“American Apparel is a perfect example,” says VDC’s Liard. “They manufacture their clothes; they distribute their clothes; they sell them in their own stores. That organization can use RFID at the point of manufacture, they can use it in the warehouses and DCs, and they use it in the retail store.”

Other item-level tagging initiatives have started as a result of anti-counterfeiting and brand protection programs for other types of products. “They’re using RFID at the item level in pharmaceuticals,” notes Liard. “As it gets manufactured and goes through the supply chain, there’s a chain of custody called ‘e-pedigree.’”



About the Author

image
Maida Napolitano
Contributing Editor

Maida Napolitano has worked as a Senior Engineer for various consulting companies specializing in supply chain, logistics, and physical distribution since 1990. She’s is the principal author for the following publications: Using Modeling to Solve Warehousing Problems (WERC); Making the Move to Cross Docking (WERC); The Time, Space & Cost Guide to Better Warehouse Design (Distribution Group); and Pick This! A Compendium of Piece-Pick Process Alternatives (WERC). She has worked for clients in the food, health care, retail, chemical, manufacturing and cosmetics industries, primarily in the field of facility layout and planning, simulation, ergonomics, and statistic analysis. She holds BS and MS degrees in Industrial Engineering from the University of the Philippines and the New Jersey Institute of Technology, respectively. She can be reached at .(JavaScript must be enabled to view this email address).


Subscribe to Logistics Management magazine

Subscribe today. It's FREE!
Get timely insider information that you can use to better manage your
entire logistics operation.
Start your FREE subscription today!

Recent Entries

Transportation stakeholders reliant on North Carolina’s major seaports are welcoming news this week, which outlines plans to enhance the intermodal and cold chain network in the region.

The index ISM uses to measure non-manufacturing growth—known as the NMI—was 56.9 in February, which was 0.2 percent ahead of January and also 0.1 percent ahead of the 12-month average of 56.8. Economic activity in the non-manufacturing sector has grown for the last 61 months, according to ISM.

Non asset-based third-party logistics (3PL) services and logistics technology services provider Transplace said today that Brooks Bentz has joined the company in a newly-created role as president of Transplace Consulting in conjunction with the launch of the company’s new North American consulting services practice.

The advent of e-commerce continues to grow and gain increased traction over time. The many ways for consumers to order and purchase goods online continues to expand and leads to various subsequent byproducts of online purchases, including shopping through multiple channels, and delivery and payment options, among other things. These types of topics serve as the thesis in the second annual UPS Pulse of the Online Shopper Global Study issued this week by UPS and comScore Inc.

A major highlight of CEVA’s fourth quarter performance was its new business wins, which were up 14 percent for all of 2014, with Freight Management wins up 14 percent, and Ocean Freight and Air Freight wins up 30 percent and 14 percent, respectively, while Contract Logistics wins were up 2 percent.

Comments

Post a comment
Commenting is not available in this channel entry.


© Copyright 2015 Peerless Media LLC, a division of EH Publishing, Inc • 111 Speen Street, Ste 200, Framingham, MA 01701 USA