LM    Topics     Warehouse    Warehouse

2022 Warehouse/Distribution Center Equipment Survey: It’s “go time” for investment

Warehouse and DC managers are feeling the pressure of e-commerce growth, high order volumes, as well as deep concerns around labor availability and international supply chain snarls. In response, our survey found that they’re ramping up spending for automation—but also spending more on their labor force to ensure an adequate pool of workers to keep goods flowing.

The simplest way to describe the overall findings from this year’s “Annual Warehouse and Distribution Center (DC) Equipment Survey” is that it’s “go-time” for investment in warehouse automation. The budget findings in our annual survey jumped up, with elevated interest and use levels for numerous types of materials handling automation, including mobile robots and other forms of warehouse robotics.

However, the findings suggest more than a crude swap out of human labor in favor of automation. Respondents to our 2022 survey—which asks readers about their spending outlook on warehouse automation, materials handling equipment, and related software—also shows an uptick in spending on labor as well as heightened interest in training.

The underlying drivers are that the economy has stayed strong, e-commerce keeps growing, and companies with distribution operations are scrambling to keep up. Under these pressures, the response is led by going with more automation, but it also includes spending to ensure enough labor force while also training people to properly interact with all the new-fangled automation.

Call it a two-pronged approach to keeping up with e-commerce fulfillment volumes. It starts with more automation, but it doesn’t end there.

“It’s the new landscape,” says Norm Saenz, managing director and partner with St. Onge, a supply chain engineering and consulting company and our research partner for this project. “I think leaders in operations see the writing on the wall. They realize that there needs to be more automation in their facilities to support throughput requirements and offset the lack of enough workforce to carry out processes manually, so we’re seeing more automation.”

In total, over the next 12 months,approximately how much do youexpect to spend on materialshandling equipment and informationsystems solutions?

Source: Peerless Media Group (PRG)

In which areas will you be investingover the next 12 months?

Source: Peerless Media Group (PRG)

This year’s survey, conducted in December 2021 by Peerless Research Group (PRG), drew responses from managers and executives in multiple verticals who are involved with materials handling system decisions. Being an annual survey, it also shows, compared with last year’s findings, less hesitancy about moving forward with investments, reaching a level on par with our 2020 survey, which was conducted before the COVID-19 pandemic hit North America.

How is the present state of the economy affecting your spending on materials handling equipment, technologies services and solutions? On what?

Source: Peerless Media Group (PRG)

2022 respondent demographics

Peerless Research Group’s (PRG) e-mail survey questionnaire was sent to readers of Logistics Management and Modern Materials Handling in December 2021, yielding 114 qualified respondents. The respondents were from sites whose primary activity is corporate headquarters (32%), warehouse/distribution (26%), manufacturing (25%), and warehousing supporting manufacturing (13%). The median annual revenue of responding companies is $52 million, while the average is $184.8 million, compared with an average of $188.9 million last year and a median of $50 million. Qualified respondents—managers and personnel involved in the purchase decision process for materials handling solutions—hold influence over an average of 108,330 square feet of DC or facility space.

Not only did this year’s survey show less hesitancy, it also shows that budgets are headed up fairly dramatically. The average anticipated spending on materials handling systems and related technology for 2022 came in at $459,316, well above last year’s average anticipated spend of $306,990.

“The trend is toward more optimism and use of automation,” says Donald Derewecki, a senior consultant with St. Onge, who along with Saenz reviewed the survey findings. “The survey shows that a cross-section of companies of different sizes realize that they have to keep up with automation and information technology to stay competitive. Maybe the smaller companies don’t want to be bleeding edge, but more of them realize they need to keep up with the mainstream.”

Do you have a pre-approved annual capital expenditures budget for materials handling solutions?

Source: Peerless Media Group (PRG)

Overall, how do you expect your spending on materials handling equipment and related information systems to change in the next two to three years?

Source: Peerless Media Group (PRG)

Goodbye hesitancy

Each year, the survey asks how the present state of the economy is affecting spending on material handling systems and related technologies. Compared to last year’s findings, there is less hesitancy. In particular, those saying that they’re “holding off” on materials handling system decisions dropped from 19% last year to 16% this year. Conversely, this year 36% say they are proceeding with investments, up from 28% last year. Those taking a “wait and see” approach also declined, from 37% last year, to 33% this year.

When asked which broad categories they’re proceeding to invest in, the categories of growing interest versus last year were lift trucks (named by 69% this year, up from 50%) and conveyors and sortation (named by 56%, up from 33%). For this year’s survey, we also added “robotics” and “automation and technology” as other areas companies are proceeding to invest in. We found that 26% want to proceed with robotics, 59% with automation and technology, and 54% with storage solutions.

When asked how 2021 spending compared to 2020, 42% said it increased, up from 23% on the same question last year. The “stayed about the same” response dropped by just 1%, but only 17% said that their spend level decreased, down sharply from 35% last year. Looking at expected spend for 2022 compared to 2021, 46% say their spend level will be up this year, which is 4% higher than the 41% who last year said their spend level would be up versus the previous year.

The annual survey also asks if spending will increase over the next “two to three” years, and, once again, the findings trend upward. This year, 57% predict increased spending on materials handling systems over the next two to three years, compared to 53% last year.

How did your company’s spending on materials handling solutions in 2021 compare with 2020? And, by what percentage?

Source: Peerless Media Group (PRG)

As mentioned, the average anticipated spend for 2022 (the survey asks for anticipated spend for the next 12 months) reached $459,316, up from $306,990 last year. The median 2022 anticipated spend is also up—from $85,552 last year to $98,458 this year.

In terms of dollar ranges for anticipated 2022 spending on materials handling, a combined 14% of respondents plan to spend $1 million or more, though with many smaller companies among respondents, 28% plan to spend less than $25,000.

How do you expect your company’s spending on materials handling solutions in 2022 to compare with 2021? And, by what percentage?

Source: Peerless Media Group (PRG)

When asked in which areas they will be investing over the next 12 months, 60% will spend on new equipment or equipment upgrades, up from 52% last year. Additionally, 59% say they plan to invest in labor, up from 53% last year, while 24% said they will invest in outside services, up from 18% the year before.

This year, 36% said they will invest in maintenance services, up from 27% last year. Forty-five percent plan spend on information technology hardware or software, down from 52% in our 2021 survey. However, other findings in the survey reflect a need for software.

The higher spending on labor doesn’t necessarily mean respondents are looking to add significantly more people. Some are likely paying higher wages or incentives to attract and retain the same, or at least an adequate level of staffing to support their operational volume, explains Saenz, as they turn to automation to reduce the overall labor requirement.

“Companies are definitely paying higher wages to try and attract and retain enough people, while also looking at more automation,” Saenz says. “Both are part of the strategies we see: spending more on automation to be more efficient and also spending more on labor to ensure they have enough people to staff these more highly automated facilities.”

While labor availability concerns have been around a long time, adds Derewecki, the problem is only escalating, making it harder for companies to meet significant peaks in demand if they rely on mostly manual processes. “It’s just very difficult for DCs that experience significant spikes in demand, to go out and find 40 or 50 extra people for just a couple of months,” Derewecki says. “That is where much of the demand for automation is coming from.”

This year’s survey also found an increase in pre-approved, annual capital expenditure (CapEx) budgets for materials handling solutions, with 39% reporting they had one, up from 36% the previous year. The average pre-approved budget climbed from $369,286 last year to $449,219 this year. When we asked about ranges, 31% reported a pre-approved budget of $1 million or more.

Spend breakdown

When asked what percentage of overall spending will be on either materials handling equipment, information systems (IS), or “other,” over the next 12 months, this year 30% is for equipment, 22% is on IS, and 25% on other. Last year, this breakdown was 41% on equipment, 36% on IS, and 23% on other.

When asked to break down which IS niches they will be spending on during the next 12 months, categories on the upswing this year include warehouse execution system (WES) software, up 3%, and enterprise resource planning (ERP), up by 2%. The warehouse management system (WMS) category held steady at 24%.

And, what percent of your overall spending during the next 12 months will be on…

Source: Peerless Media Group (PRG)

In terms of interest in various types of material handling equipment over the next 12 months, the growth categories included lift trucks (8% gain versus last year), radio frequency identification (RFID) solutions (up by 6%), power transmission including motors and belts (up 7%), AMRs and AGVs (up 3%), and more dramatically, packaging investments including palletizers and pallets, up from 25% last year to 40% this year.

The survey also asked about which new purchases or substantial changes to existing systems fell into one of three broad areas of investment: IT; use of 3PLs; and various “system equipment” investments such as automated retrieval, lift truck and conveyors. The big gainer here was systems equipment, up from 24% last year, to 44% this year.

While IT was down 10% versus last year, Derewecki and Saenz observe that “systems solutions” like automated storage and retrieval systems or robotic, high-density storage systems typically involve software to run and manage, so some IS spending is wrapped up in these investments.

Which systems and equipment are you likely to evaluate or consider during the next 12 months?

Source: Peerless Media Group (PRG)

Another part of the survey that bodes well for software vendors is that many respondents want to automate how they gauge productivity for key factors like cycle times or throughput going forward. This ultimately takes software both to generate the data and to visualize metrics. This question asks if respondents use a manual process for certain metrics, an automated one, or are currently not monitoring the area, as well as if the plan to automate measures in two years.

For example, this year, we found that while just 30% automate measurement of daily throughput, 69% anticipate automating this metric in two years. Similarly, while 27% have an automated means for tracking order cycle times, 54% plan to automate this within two years. Another is dock-to-stock cycle time, measured in an automated way by 25% today, but 55% anticipate a more automated means of tracking this within two years.

In terms of industry issues rated as “very important” today, compared with what will be very important two years from now, some issues like cost containment and safety drew high percentages today, and remained fairly stable in importance rating two years out.

Others showed a shaper rise in importance, including training, rated as very important today by 60%, but very important for 72% in two years. Capital availability, cycle times, hours of service, having a global presence, and dealing with smaller, more frequent orders also increased in this two-year look ahead on “very important” practices.

How important are each of these issues today? Two years from now, how important do you expect these issues to be?

Source: Peerless Media Group (PRG)

Generally, observes Derewecki, automation solutions involve training, even if once installed they reduce the overall labor requirement versus manual processes. “Training people on how to use software, and how to maintain and work with any automation they’re putting in, is going to be critical to getting the most from these systems,” he says.

The rise in having pre-approved budgets, as well as projected higher importance on CapEx funding as an issue, may reflect that more organizations are trying to justify materials handling automation expenditures in a more structured, long-term way. As Saenz explains, “the lead time for getting some of these systems approved and installed can be quite long, so you have to think ahead.”

Saenz adds that there’s lot of DC network projects going on, consolidating conventional buildings down into fewer, more highly automated buildings. “These factors are putting pressure on organizations to come up with longer-term capital outlay plans, so that they can get projects approved and actually have new systems in place when and where they need them.”

Robots on the rise

Perhaps of little surprise, interest and use of robotics was up. Not only did 26% of respondents name robotics as an investment category that they’ll proceed with, when we asked for details about AMRs and AGVs there was growing interest as well.

This year, 10% said that they currently use AMRs or AGVs, and 23% are evaluating them for use within the next 24 months. Last year, that breakdown was 6% who currently use, and 14% evaluating them.

Does your company currently use, or are you considering automated guided vehicles and/or robotics technologies for materials handling applications?

Source: Peerless Media Group (PRG)

Similarly, interest in industrial robotic solutions with articulating arms (used for piece picking, palletizing, and other processes) is growing, with 14% saying that they use industrial robotics of some type, and 22% are evaluating them for use during the next 24 months. Last year, that breakdown was 7% who currently use, and 20% evaluating them.

We further asked which applications AGVs, AMRs, and industrial robots will be used for. Growth applications for AMRs and AGVs this year include order fulfillment (both “part to picker” and “picker to part” workflows), transport, as well as transport involved with palletizing and depalletizing. For other robotic technology, growth applications included truck unloading, truck loading, bin picking, as well as palletizing and depalletizing.

In your operation, which is now most common? Which do you believe will be most common in 2 years?

Source: Peerless Media Group (PRG)

This year’s findings around maintenance of materials handling systems shows that use of internal staff remains the most common source for carrying out maintenance, well ahead of outsourcing maintenance entirely or using a combined approach of internal and external resources. For 2022, 67% said that they rely on in-house maintenance, up from 53% in 2021.

However, there was also a 6% rise in respondents who outsource the maintenance function, while 23% use a combined approach, down from 35% in 2021.

When asked what role automation vendors or third parties play in maintaining automation, upgrades and upkeep visits were the most commonly cited purpose, at 43%, down 3% from the previous year. Most reasons stayed fairly stable, though use of vendors and third parties for maintenance “consulting” was down 10%, though for “data analysis” it was up from 14% last year to 19% this year.

For which applications are you employing/will you employ…

Source: Peerless Media Group (PRG)

E-commerce and capacity

The annual survey asks about the most common method of fulfilling online orders today, and which method respondents believe will be most common in two years.

The most common practice today is to “buy-online, ship to customer from a DC,” used by 35% today, and expected to be the most commonly used method by 46% in two years. Similarly, 13% of respondents this year said that “buy online, ship to customer from store,” is today the most common method—but this grows to 19% in two years.

Some other methods are projected as taking a slight dip in two years, such as “buy-online, ship to customer from vendor,” seen as most common by 17% today, but only by 13% in two years.

The survey also asked if e-commerce “will or is already prompting change in where distribution and manufacturing activities take place.” This year, 57% said e-commerce is prompting more distribution functions in manufacturing, up a full 10% from last year. This year, 32% said e-commerce was prompting more manufacturing functions in distribution, down from 47% last year.

When asked “where does packaging and fulfillment occur” (with choices including warehouses, manufacturing sites, fulfillment centers, DCs, retail stores, and outsourced), the most common type of location remains a warehouse, cited by 55% this year, up from 47% last year.

Additionally, 27% this year indicate that packaging and fulfillment occurs at a fulfillment center, up from 19% last year, while 8% cited stores this year, up from 2% last year, and finally, 53% say packaging occurs in manufacturing, up from 40% last year.

To some extent, the warehouse space crunch can be seen in this year’s survey results. For example, when asked about current activity/capacity level for standalone DCs, a combined 31% have a capacity level that exceeds 80%, which shows a significant chunk of respondents likely need more space. However, for those respondents reporting a capacity level of 50% or more, the average capacity level is 78% this year, down slightly from 80% the year before.

What is your current activity level for standalone warehouses/distribution centers?

Source: Peerless Media Group (PRG)

Similarly, for warehouses that support manufacturing, the survey found that a combined 23% currently exceed a capacity level of 80%. Among those reporting 50% or more capacity, the average level reached 80%, down slightly from last year, but still indicating tight space capacity for these respondents.

As Saenz sees it, capacity levels can vary widely between different companies, even though it’s true that warehouse space has grown tighter this year. International supply chain snarls can affect companies differently, he adds.

“Some companies can’t source the inventory they need, so they have warehouses with a surprising amount of empty space, while other organizations have decided to over buy intentionally to ensure availability for customers, so they are short on space,” says Saenz. “It’s sort of a mess with inventory, because of the larger supply chain issues.”

The big picture

Even though this survey focuses on DC/plant level systems, some findings reflect the bigger picture. For example, this year, the concerns around labor availability are seen in the growing importance of workload planning as a key practice for managing DC operations.

This year, 46% rated workload planning as important, coming in as the fourth leading practice today; but two years from now, 53% see it as being very important. Likewise, labor productivity was already rated as important by 54%, but 60% say it will be important two years out. The top practice is “continuous improvement,” but this practice is seen as declining in importance two years out.

A similar question on important practices for manufacturers found that just-in-time (JIT) production, rated as a key practice by 25% today, dips slightly to 22% in two years. Outsourcing among manufacturers, rated as important by 25% today, is also seen as declining in importance in two years, to 20%.

Such findings are likely related to today’s international supply chain snarls and may reflect some respondents rethinking their sourcing and production strategies.

On the other hand, respondents see lean manufacturing as growing in importance two years out, so there appears to be lasting confidence in pull-based methods, even if it was a tough year for the JIT approach. “For some companies, it has turned from just in time, to just in case we can’t get it, we’re going to buy more,” observes Derewecki.

In the next two years, how do you expect your activity level to change for standalone warehouses/DCs?

Source: Peerless Media Group (PRG)

Our questions about supply chain risk also showed heightened global supply chain concerns. Specifically, “logistics risks” increased as a risk factor being analyzed by respondents, from 52% last year, to 65% this year.

Additionally, “outsourcing tasks” was being analyzed for risk by 39%, up from 24% last year. A higher percentage is also looking at natural disasters as a risk factor this year (up by 5%). What’s more, this year, 55% said that they have a program for identifying and analyzing risks, up sharply from 39% the year before, and also a bit higher than in 2020, when 52% said they had a plan for identifying risks.

Macro-level supply chain issues aside, one thing that’s clear in multiple findings in the 2022 survey: respondents are ready to embrace more automation and robotics, and they are putting in place more budget to make it happen.

Article Topics

Magazine Archive
Equipment Survey
Peerless Research Group
Warehouse DC
   All topics

Equipment Survey News & Resources

2022 Warehouse/Distribution Center Equipment Survey: It’s “go time” for investment
2021 Warehouse/DC Equipment Survey: Preparing for post-pandemic volumes
2020 Warehouse/DC Equipment Survey: Making the right moves to offset pressures

Latest in Logistics

Q&A: Cary Davis, American Association of Port Authorities President and CEO-elect
Estes’ $1.52 billion bid beats ODFL’s bankruptcy offer for Yellow terminals
FedEx reports mixed fiscal first quarter earnings, with Ground up 3%
Ryder announces the official entrance of its BrightDrop Zevo 600 electric vans
Success in Volatile Markets: How High-Tech Companies can Optimize Their S&OP Process
ATA August tonnage readings are mixed
USPS is gearing up for Peak Season, says it will not levy a holiday surcharge
More Logistics

About the Author

Roberto Michel's avatar
Roberto Michel
Roberto Michel, senior editor for Modern, has covered manufacturing and supply chain management trends since 1996, mainly as a former staff editor and former contributor at Manufacturing Business Technology. He has been a contributor to Modern since 2004. He has worked on numerous show dailies, including at ProMat, the North American Material Handling Logistics show, and National Manufacturing Week. You can reach him at: [email protected].
Follow Modern Materials Handling on FaceBook

Subscribe to Logistics Management Magazine

Subscribe today!
Not a subscriber? Sign up today!
Subscribe today. It's FREE.
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today.

September 2023 Logistics Management

September 6, 2023 · Logistics operations are facing a human capital crisis that poses a threat to both performance and competitiveness. In this year’s study, our authors explore how organizations can compete for talent in an increasingly limited talent pool; how organizations are competing in an increasingly dynamic business environment; and examine the technologies that shippers now need to use to stay ahead of the curve.

Latest Resources

Do More with the Same in Logistics and Distribution
Download this new white paper to learn best-practice strategies that can help your company do more with the same — optimizing your workforce to weather the current economic climate and pave a successful path forward.
Managing Global Complexity for the Long Term
Motor Freight Special Issue: Finding a way back to “normal”
More resources

Latest Resources

Driving ROI with Better Routing, Scheduling and Fleet Management
Driving ROI with Better Routing, Scheduling and Fleet Management
Improve efficiency and drive ROI with better vehicle routing, scheduling and fleet management solutions. Download our report to find out how.
Your Road Guide to Worry-Free Shipping Between the U.S. and Canada
Your Road Guide to Worry-Free Shipping Between the U.S. and Canada
Get expert guidance and best practices to help you navigate the cross-border shipping process with ease. Download our free white paper today!

Warehouse/DC Automation & Technology: It’s “go time” for investment
Warehouse/DC Automation & Technology: It’s “go time” for investment
In our latest Special Digital Issue, Logistics Management has curated several feature stories that neatly encapsulate the rise of automated systems and...
Why accurate, real-time location data is a must for efficient operations
Why accurate, real-time location data is a must for efficient operations
Find out how next-generation workforce management apps use accurate, real-time location data to power successful operations in this webinar with Radar CEO...
Should you lease or buy your lift truck fleet?
Should you lease or buy your lift truck fleet?
Leasing critical equipment like lift trucks can offer flexibility, but some lease terms can be complex and costly if you’re not...