LM    Topics     Logistics    Warehouse

April manufacturing output declines for sixth straight month, reports ISM


April manufacturing output saw another month of contraction, according to the new edition of the Manufacturing Report on Business, which was released today by the Institute for Supply Management (ISM).

The report’s key metric, the PMI, came at 47.1 (a reading of 50 or higher indicates growth), marking a slight 0.8% gain over March’s 46.3, while contracting, at a slower rate, for the sixth consecutive month. The past six months of contraction, through April, were preceded by a stretch of 29 consecutive months of growth. ISM also said that the overall economy contracted, at a slower rate, in April, for the sixth consecutive month, which was preceded by 30 consecutive months of growth.

The April PMI is 3% below the 12-month average of 50.1, with May 2022 marking the high, for that period, at 56.1, and March 2023, at 46.3, marking the lowest.  

ISM reported that five manufacturing sectors— Printing & Related Support Activities; Apparel, Leather & Allied Products; Petroleum & Coal Products; Fabricated Metal Products; and Transportation Equipment—saw growth in April. And 11 sectors saw declines, including: Furniture & Related Products; Wood Products; Nonmetallic Mineral Products; Electrical Equipment, Appliances & Components; Plastics & Rubber Products; Chemical Products; Machinery; Primary Metals; Computer & Electronic Products; Food, Beverage & Tobacco Products; and Miscellaneous Manufacturing.

The report’s key metrics were mixed in April, including:

  • New Orders, which are commonly referred to as the engine that drives manufacturing, increased 1.4%, to 45.7, contracting, at a slower rate, for the eighth consecutive month, with eight sectors reporting growth;
  • Production increased 1.1%, to 48.9, contracting at a slower rate, for the fifth consecutive month, following 30 consecutive months of growth, but seeing its best reading since entering contraction last December, with 11 sectors reporting growth;
  • Employment came in at 50.2, rising 3.3%, showing growth, after two months of contraction, with seven sectors reporting growth;
  • Supplier Deliveries, at 44.6 (a reading above 50 indicates contraction), grew, at a faster rate, for the seventh consecutive month, with three sectors reporting slower deliveries in April, for its fastest supplier delivery performance since March 2009, when it was at 43.2;
  • Backlog of orders, at 43.1, slipped 0.8%, contracting, at a faster rate, for the seventh consecutive month, following 27 months of expansion, with three sectors growing order backlogs;
  • Inventories, at 46.3, were down 1.2%, contracting, at a faster rate, for the second straight month, following 19 consecutive months of growth
  • Customer Inventories, at 51.3, increased 2.4%, moving from “too low” in March to “too high” in April, with seven sectors reporting customers’ inventories as too high; and
  • Prices, at 53.2, rising 4.0%, increasing after contraction in March and growth in February, with nine sectors reporting higher prices paid for raw materials

Comments submitted by the ISM member respondents again highlighted various themes related to the economy and market conditions.

“Having invested heavily to de-risk the supply chain over the last three years due to COVID-19, we are looking to reset with a number of our suppliers to reduce inventory, which has grown steadily over that period,” said a Computer & Electronic Products respondent. “Lead times are generally coming down, although electronic components are still a concern.”

Tim Fiore, Chair of the ISM's Manufacturing Business Survey Committee, said in an interview that even though the PMI did not move back into growth territory, there were some positive signs in the April report.

One was the New Orders reading, which he explained it contracted at a lower level than in March, coupled with seasonal factors that would have pushed reading closer to 48. Another positive he cited was the New Export Orders reading up 2.2% to 49.8, coupled with Backlog of Orders, while contracting, remaining at the same level as March.

“The most alarming problem here is that our customer inventory numbers are now probably at the the low end of too high, which kind of says on the inventory scale, or the greater supply chain scale, that the customers warehouses are full of stuff, so they don’t really have a need for anymore,” he said. “The only way to change that is by having more demand so they can ship more. That is offset by the fact that the manufacturing inventory number is down to its lowest level in many years, and that is really preparation for what they perceive to be a future drop in output.”

The most positive part of the report, according to Fiore, is that the best measure of billings and revenue and production, with the April production number remaining pretty strong, up 1.1% to 48.9.

“That is pretty good, and I cannot complain about that,” he said. “The accommodative piece here is really the input side, with suppliers delivering very fast, and manufacturing inventory is very low—so it would help to see that start to rebound at some point,” he said. “Our percentage [of manufacturing sectors] with PMI under 45 actually came down to 12% from 25% in March. I see that as a positive. Chemical products is still not recovering. It was very close to 45, which is a negative and was a negative in March. We are not seeing that chemical products demand growing. The manufacturing hire-to-fire ratio is still less than 2:1, which is a little bit better than March…and way off the 9:1 we saw a year ago. It is still a negative. Pricing on the transportation side and the ability to get transportation are still very accommodative and is a negative, too.”


Article Topics

News
Logistics
Transportation
Warehouse
Institute for Supply Management
ISM
Manufacturing
PMI
   All topics

Warehouse News & Resources

The Ultimate WMS Checklist: Find the Perfect Fit
40th Annual Salary Survey: Salary and satisfaction up
Data Capture: Bar coding’s new companions
Salary Survey: Pay, satisfaction, youth on the rise
Examining the impact of the Taiwan earthquake on global supply chain operations
Reverse Logistics: Best Practices for Efficient Distribution Center Returns
Exploring Customized Forklift Solutions
More Warehouse

Latest in Logistics

Shipment and expenditure decreases trend down, notes Cass Freight Index
March trucking tonnage trends down, reports ATA
FTR Shippers Conditions Index enters negative territory
DAT March Truckload Volume Index sees modest March gains
National diesel average, for week of April 22, is down for the second straight week
UPS reports first quarter earnings decline
LM Podcast Series: Assessing the freight transportation and logistics markets with Tom Nightingale, AFS Logistics
More Logistics

About the Author

Jeff Berman's avatar
Jeff Berman
Jeff Berman is Group News Editor for Logistics Management, Modern Materials Handling, and Supply Chain Management Review and is a contributor to Robotics 24/7. Jeff works and lives in Cape Elizabeth, Maine, where he covers all aspects of the supply chain, logistics, freight transportation, and materials handling sectors on a daily basis.
Follow Modern Materials Handling on FaceBook

Subscribe to Logistics Management Magazine

Subscribe today!
Not a subscriber? Sign up today!
Subscribe today. It's FREE.
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today.

April 2023 Logistics Management

April 9, 2024 · Our latest Peerless Research Group (PRG) survey reveals current salary trends, career satisfaction rates, and shifting job priorities for individuals working in logistics and supply chain management. Here are all of the findings—and a few surprises.

Latest Resources

Warehouse/DC Automation & Technology: Time to gain a competitive advantage
In our latest Special Digital Issue, Logistics Management has curated several feature stories that neatly encapsulate the rise of the automated systems and related technologies that are revolutionizing how warehouse and DC operations work.
The Ultimate WMS Checklist: Find the Perfect Fit
Reverse Logistics: Best Practices for Efficient Distribution Center Returns
More resources

Latest Resources

2024 Transportation Rate Outlook: More of the same?
2024 Transportation Rate Outlook: More of the same?
Get ahead of the game with our panel of analysts, discussing freight transportation rates and capacity fluctuations for the coming year. Join...
Bypassing the Bottleneck: Solutions for Avoiding Freight Congestion at the U.S.-Mexico Border
Bypassing the Bottleneck: Solutions for Avoiding Freight Congestion at the U.S.-Mexico Border
Find out how you can navigate this congestion more effectively with new strategies that can help your business avoid delays, optimize operations,...

Driving ROI with Better Routing, Scheduling and Fleet Management
Driving ROI with Better Routing, Scheduling and Fleet Management
Improve efficiency and drive ROI with better vehicle routing, scheduling and fleet management solutions. Download our report to find out how.
Your Road Guide to Worry-Free Shipping Between the U.S. and Canada
Your Road Guide to Worry-Free Shipping Between the U.S. and Canada
Get expert guidance and best practices to help you navigate the cross-border shipping process with ease. Download our free white paper today!
Warehouse/DC Automation & Technology: It’s “go time” for investment
Warehouse/DC Automation & Technology: It’s “go time” for investment
In our latest Special Digital Issue, Logistics Management has curated several feature stories that neatly encapsulate the rise of automated systems and...