LM    Topics 

UAW-Big Three strike is replete with supply chain implications


While the United Auto Workers (UAW) union strike against the “Big Three” of General Motors, Ford, and Stellantis (Chrysler's parent company) has been ongoing since September 15, coupled with the number of employee walk-outs continuing to rise, the supply chain impacts and ramifications are likely to increase the longer the situation goes on, according various industry stakeholders.

To be sure, the timing for a labor strike in any industry is never good, but the damage a long-term strike could inflict on the automotive sector could be particularly acute, given the limited availability of various automobiles, which has been an intermittent issue going back to the onset of the pandemic.

Spencer Shute, principal consultant at Proxima, a Bain & Company supply chain consulting firm, explained in comments provided to LM that the UAW strike has the potential to send the automotive supply chain into a bullwhip effect in overdrive—largely due to the unpredictability of striking locations, which United Auto Workers President Shawn Fain has coordinated in order to get laborers the best deal possible.

“This will cause canceled orders, surplus, and possible bottlenecks across the supply chain,” he said. “Not only is this an upstream supply chain concern but also a downstream concern, as the inevitable impact on consumers in the auto market unfolds. While some companies may benefit initially from reduced supplier orders coming from GM, Ford, and Stellantis, as the strikes progress and prolong, disruption will impact the whole automotive supply chain even further than the initial blow, and forecast predictability is greatly reduced, creating even more uncertainty for the entire industry.”   

What’s more, Shute noted that suppliers will be looking to other auto manufacturers to prevent their supply chains from having too much on-hand product while simultaneously working to ensure supply chain continuity once the strikes are over.

“Compounding economic conditions have already started to impact the new car market but expect the non-UAW manufacturers to work on securing greater market presence during this time,” he added.

From a freight movement perspective, Ken Adamo, Chief Data Scientist, for DAT Freight & Analytics, told LM that a long-term strike would be devastating, in terms of volumes, especially for Midwestern carriers.

“There's a lot of freight that moves in around in between the kind of big three ecosystem,” he said. “I think the part of this with the least impact, oddly, will be finished autos, to be honest. A lot of that moves on trains. I think the story is all of the inbound shipping and in between shipping that happens. Think of the the parts, the components, the glass and all of the that comes in to make the cars and all the tier one auto suppliers and even in between and even trickling into parcel, when you think about the dealer part network shipping that happens.”

The DAT executive added that, looking ahead, this situation is likely several weeks away from that type of situation, in terms of end-use product being significantly impacted.

“Most of the big three have 40 or more days of inventory on hand,” he said. “I think the UAW knows how much runway they have to play with before it really starts to cut into bone. But it's escalating. I mean, other than all the other labor problems we've talked about over the last year and a half, this one seems to actually be escalating. It is definitely a bearish situation for trucking.”

With the automotive strike occurring at a time when U.S.-bound imports remain low, Walter Kemmsies, president of The Kemmsies Group, a provider of industrial and logistics real estate brokerage and consulting services, made the case that any situation which would boost current import readings would be welcomed news.

“They [automotive manufacturers] are basically saying if you start messing with my supply chain by going to the places where the parts are kept, I can still ship stuff from other parts of the world, like Japan, Korea, either by sea or by air. I can get stuff from Mexico, parts from Europe, and I can fly them in.  I can also put them in containers and send them over.”

Regarding unions, Kemmsies noted that unions around the world are a lot less-stronger than they used to be, especially when compared to the 1970s, coupled with what he called a suspicion that the auto companies just started to ramp up production of all kinds of things outside the U.S. to get ahead of the labor situation.

“They've got plenty of inventory of things going to where they are going to be needed already in transit,” he said. “I could be wrong, but I don't think I don't think the corporate CEOs overlooked this.

A logistics services executive told LM that leading up to the strike, there had been a heavy focus on contingency planning related to it.

Part of that planning, the executive said, is being careful regarding asset placement, with a focus on trying to not have them as engaged in the areas that would be most impacted.

“That has more to do with after-market parts and some of those types of things in the production lines,” the executive said. “It is a situation that is very difficult to work through. We hope everybody has cool heads in that space so that major areas of the economy are not shut down because of this.”


Article Topics

News
Automotive
Labor
Parcel
Railroad Shipping
Strike
Trucking
UAW
Unions
   All topics

Labor News & Resources

Potential Canadian rail strike could damage the country’s economy
Senators take a close look at Amazon with Warehouse Worker Protection Act
Norfolk Southern-Ancora Holdings proxy battle accelerates
In Pyrrhic victory, Teamsters win as judge tosses Yellow’s $137 million lawsuit
Industry groups call on ILA and USMX to get back to the table for a new labor deal
IANA calls out DOL on new independent contractor final rule
ATA warns of ‘tangled mess’ due to latest Labor Department independent contractor ruling
More Labor

Latest in Logistics

Port Tracker report is bullish on import growth over the balance of 2024
Varying opinions on the tracks regarding STB’s adopted reciprocal switching rule
National diesel average falls for the fourth consecutive week, reports EIA
New Descartes’ study examines consumer preferences, changes, and shifts in e-commerce home delivery preferences
Potential Canadian rail strike could damage the country’s economy
C.H. Robinson highlights progress of its AI-focused offerings with a focus on automating shipping processes
UPS announces CFO Newman to leave company, effective June 1
More Logistics

About the Author

Jeff Berman's avatar
Jeff Berman
Jeff Berman is Group News Editor for Logistics Management, Modern Materials Handling, and Supply Chain Management Review and is a contributor to Robotics 24/7. Jeff works and lives in Cape Elizabeth, Maine, where he covers all aspects of the supply chain, logistics, freight transportation, and materials handling sectors on a daily basis.
Follow Modern Materials Handling on FaceBook

Subscribe to Logistics Management Magazine

Subscribe today!
Not a subscriber? Sign up today!
Subscribe today. It's FREE.
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today.

May 2024 Logistics Management

May 2, 2024 · As the days of slow, invisible supply chains that “worked behind the scenes” continue to fade in the rearview mirror, companies are improving their demand forecasting, gaining real-time visibility across their networks and streamlining their operations—and its software that makes that all possible.

Latest Resources

Warehouse/DC Automation & Technology: Time to gain a competitive advantage
In our latest Special Digital Issue, Logistics Management has curated several feature stories that neatly encapsulate the rise of the automated systems and related technologies that are revolutionizing how warehouse and DC operations work.
The Ultimate WMS Checklist: Find the Perfect Fit
Reverse Logistics: Best Practices for Efficient Distribution Center Returns
More resources

Latest Resources

2024 Transportation Rate Outlook: More of the same?
2024 Transportation Rate Outlook: More of the same?
Get ahead of the game with our panel of analysts, discussing freight transportation rates and capacity fluctuations for the coming year. Join...
Bypassing the Bottleneck: Solutions for Avoiding Freight Congestion at the U.S.-Mexico Border
Bypassing the Bottleneck: Solutions for Avoiding Freight Congestion at the U.S.-Mexico Border
Find out how you can navigate this congestion more effectively with new strategies that can help your business avoid delays, optimize operations,...

Driving ROI with Better Routing, Scheduling and Fleet Management
Driving ROI with Better Routing, Scheduling and Fleet Management
Improve efficiency and drive ROI with better vehicle routing, scheduling and fleet management solutions. Download our report to find out how.
Your Road Guide to Worry-Free Shipping Between the U.S. and Canada
Your Road Guide to Worry-Free Shipping Between the U.S. and Canada
Get expert guidance and best practices to help you navigate the cross-border shipping process with ease. Download our free white paper today!
Warehouse/DC Automation & Technology: It’s “go time” for investment
Warehouse/DC Automation & Technology: It’s “go time” for investment
In our latest Special Digital Issue, Logistics Management has curated several feature stories that neatly encapsulate the rise of automated systems and...