LM    Topics 

Manufacturing growth is down for third straight month, says ISM

The PMI, the index used by the ISM to measure manufacturing activity, was 49.6 in August, which is 0.2 percentage points below July and 0.1 percent lower than June.


Manufacturing growth in August remained as it had been in the previous two months—sluggish.

The PMI, the index used by the Institute for Supply Management (ISM) to measure manufacturing activity, was 49.6 in August, which is 0.2 percentage points below July and 0.1 percent lower than June.

A reading of 50 or higher indicates growth is occurring. Economic activity in the manufacturing sector had expanded for 34 straight months prior to June’s contraction and overall economic activity has expanded for 39 straight months. August was below the 12-month average of 52.2 and marked the third time it had been below 50—and its lowest reading—since July 2009.

New Orders, which are often referred to as the ‘engine’ which drives manufacturing, dipped 0.9 percent to 47.1, following a 0.2 percent bump in July and June’s 12.3 percent drop-off from May’s 60.1, which was its highest level since April 2011. New Orders had not seen this type of drop since October 2001, when it fell 12.4 percent.

Production was down 4.1 percent to 47.2, and Employment was down 0.4 percent at 51.6. Production in August was down for the first time since May 2009, when it was at 43.9 and is at its lowest level since November 2009. And Employment, while down in August, grew for the 35th consecutive month.

A Production index above 51.2 percent is generally consistent with an increase in the Federal Reserve Board’s Industrial Production figures, according to the ISM. And an Employment index more than 50.5 percent is generally consistent with an increase in the Bureau of Labor Statistics data on manufacturing employment.
 
“We are definitely on a flat stretch here, and there are potentially a few bumps or dips ahead as well,” said Bradley J. Holcomb, CPSM, CPSD, chair of the ISM Manufacturing Business Survey Committee, in an interview. “This all really stems from the New Orders situation, with orders down for three months straight and along with that Export orders (up 0.5 percent at 47.0 but still below 50) down for three consecutive months having a negative impact.”

And Backlog of Orders—down 0.5 percent at 42.5—and at their lowest point since 2011 are all contributing to what Holcomb described as a glut in Production output.

Prices jumped up 14.5 percent in August to 54.0, marking the first time the PMI has seen an increase in the price of raw materials since April 2012, when Prices hit 61 and it is also the largest month-over-month increase since September 2005, following a 15.5 percent gain from August 2005, according to ISM officials. What’s more, the ISM pointed out that for this past August 23 percent of respondents said they paid higher prices than in July, with another 62 percent saying prices were the same and 15 percent said they paid lower prices. Prices at 49.4 percent or above are considered as “generally consistent” with an increase in the Bureau of Labor Statistics Index of Manufacturers Prices, according to ISM.

“This is largely related to fuel prices, corn products being affected by the Midwest drought that is severely impacting those prices, and a rise in plastic components and carbon and steel also which require energy to manufacture, so that is quite a jump as we have been down so much the last couple of months,” Holcomb said.

Inventories saw the negative net effect of slower overall sales, rising 4.0 percent to 53.0 and reflect how inventories are showing growth for the first time since September 2011.

Holcomb characterized this gain as “unwanted” inventory, which is not positive and speaks to the lack of new orders and a slowdown in production and manufacturers not being able to utilize the inventory on hand as they build up in an unwanted way. Should there be a similar gain in inventory from August to September Holcomb said that would not be a good situation.

ISM supply manager respondents in this month’s report cited a general theme of an economic slowdown, resulting in low order growth, coupled with backlog and unwanted inventory buildup.

And these comments, said Holcomb, directly speak to a slowdown in demand and incoming orders, too.

“Without new orders coming in, we are looking for more of the same at best over the next few months,” said Holcomb. “People are also waiting to see how the election turns out as well and what that means before they take their hands out of their pockets.”


Article Topics

ISM
Manufacturing
   All topics

Latest in Logistics

A buying guide to outsourcing transportation management
SKU vs. Item-level Data Visibility: Why it Matters for End-to-End Traceability
Key benefits of being an Amazon Business customer with Business Prime
USPS cites continued progress in fiscal second quarter earnings despite recording another net loss
U.S. rail carload and intermodal volumes are mixed, for week ending May 4, reports AAR
New Ryder analysis takes a close look at obstacles in converting to electric vehicles
Norfolk Southern shareholders sign off on 10 board of directors nominees
More Logistics

About the Author

Jeff Berman's avatar
Jeff Berman
Jeff Berman is Group News Editor for Logistics Management, Modern Materials Handling, and Supply Chain Management Review and is a contributor to Robotics 24/7. Jeff works and lives in Cape Elizabeth, Maine, where he covers all aspects of the supply chain, logistics, freight transportation, and materials handling sectors on a daily basis.
Follow Modern Materials Handling on FaceBook

About the Author

Jeff Berman's avatar
Jeff Berman
Jeff Berman is Group News Editor for Logistics Management, Modern Materials Handling, and Supply Chain Management Review and is a contributor to Robotics 24/7. Jeff works and lives in Cape Elizabeth, Maine, where he covers all aspects of the supply chain, logistics, freight transportation, and materials handling sectors on a daily basis.
Follow Modern Materials Handling on FaceBook

Subscribe to Logistics Management Magazine

Subscribe today!
Not a subscriber? Sign up today!
Subscribe today. It's FREE.
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today.

May 2024 Logistics Management

May 2, 2024 · As the days of slow, invisible supply chains that “worked behind the scenes” continue to fade in the rearview mirror, companies are improving their demand forecasting, gaining real-time visibility across their networks and streamlining their operations—and its software that makes that all possible.

Latest Resources

Last-Mile Evolution: Embracing 5 Trends for Success
Prepare to transform your last-mile strategy by exploring the ebook "5 Last-Mile Trends to Have on Your Radar," which provides actionable insights for aligning e-commerce with customer needs, enhancing delivery experiences, optimizing costs, and ensuring positive interactions for both customers and drivers.
Optimizing Parcel Packing to Cut Costs
A buying guide to outsourcing transportation management
More resources

Latest Resources

2024 Transportation Rate Outlook: More of the same?
2024 Transportation Rate Outlook: More of the same?
Get ahead of the game with our panel of analysts, discussing freight transportation rates and capacity fluctuations for the coming year. Join...
Bypassing the Bottleneck: Solutions for Avoiding Freight Congestion at the U.S.-Mexico Border
Bypassing the Bottleneck: Solutions for Avoiding Freight Congestion at the U.S.-Mexico Border
Find out how you can navigate this congestion more effectively with new strategies that can help your business avoid delays, optimize operations,...

Driving ROI with Better Routing, Scheduling and Fleet Management
Driving ROI with Better Routing, Scheduling and Fleet Management
Improve efficiency and drive ROI with better vehicle routing, scheduling and fleet management solutions. Download our report to find out how.
Your Road Guide to Worry-Free Shipping Between the U.S. and Canada
Your Road Guide to Worry-Free Shipping Between the U.S. and Canada
Get expert guidance and best practices to help you navigate the cross-border shipping process with ease. Download our free white paper today!
Warehouse/DC Automation & Technology: It’s “go time” for investment
Warehouse/DC Automation & Technology: It’s “go time” for investment
In our latest Special Digital Issue, Logistics Management has curated several feature stories that neatly encapsulate the rise of automated systems and...