Corrugated industry significantly improves environmental performance

A new U.S. corrugated industry life cycle assessment (LCA) study shows a significant 32 percent reduction per unit in the industry's greenhouse gas (GHG) emissions between 2006 and 2010.
By Modern Materials Handling Staff
June 04, 2014 - MMH Editorial

A new U.S. corrugated industry life cycle assessment (LCA) study shows a significant 32 percent reduction per unit in the industry’s greenhouse gas (GHG) emissions between 2006 and 2010. Additionally, the industry improved in other environmental impact indicators. Effects of nutrient releases on receiving waters and soils (eutrophication) decreased by 22 percent and effects of particulate matter emissions (respiratory effects) decreased by 14 percent.

The peer-reviewed study, commissioned by the Corrugated Packaging Alliance (CPA) and conducted by the National Council for Air and Stream Improvement (NCASI), measures the environmental impacts of a 1 kg industry-average corrugated product manufactured in 2010 and shows substantial improvements over the industry-average product manufactured in 2006, as reported in the industry’s first baseline LCA.

The reduction in GHG emissions per unit is primarily attributed to the increased recovery for recycling of corrugated materials. The recovery rate for old corrugated containers (OCC) increased from 72 percent in 2006 to 85 percent in 2010. As more corrugated material is recovered, less goes to landfills, thereby reducing methane emissions.

Containerboard mills also helped reduce GHG emissions by decreasing the overall use of fossil fuels and switching to less carbon-intensive fuels like natural gas. 

Dennis Colley, executive director of the CPA, said, “We’re very pleased about our reduced greenhouse gas emissions and overall environmental impact reductions, driven by our industry’s historic commitment to continuous improvement and environmental stewardship. We’ve been proactively improving on our environmental footprint for decades, and through the use of LCA, we’re able to document the results of our efforts.”

The study also examined the relative impacts of industry-average corrugated products (which contained 46 percent recycled fiber) and 100 percent recycled corrugated products made in 2010. Corrugated products can be made from 100 percent new fiber, 100 percent recycled fiber, or a blend of these fibers. All types of fiber have benefits and contribute to maintaining a sustainable corrugated packaging industry. The LCA showed that both the 100 percent recycled and industry-average corrugated products have environmental advantages in different impact categories. One is not better than the other across all environmental impact indicators, and the corrugated industry must maintain a supply of new fiber to augment those fibers that are recovered and used for production. The worldwide market needs both new and recycled fiber in order to produce the best quality of corrugated material and ensure a consistent and sustainable supply.

The LCA examined effects on seven environmental impact indicators: global warming potential (greenhouse gas emissions), eutrophication, acidification, smog, ozone depletion, respiratory effects, fossil fuel depletion; and four inventory indicators: water use, water consumption, renewable energy demand and non-renewable energy demand. It was conducted in accordance with ISO 14040/44 standards and guidelines for life cycle assessment studies and was subjected to review by a third-party critical review panel.

A detailed, LCA summary report is available for download on the Corrugated Packaging Alliance website (http://www.corrugated.org).



Subscribe to Logistics Management magazine

Subscribe today. It's FREE!
Get timely insider information that you can use to better manage your
entire logistics operation.
Start your FREE subscription today!

Recent Entries

The saga continues, as the PMA and ILWU plan to resume their contract negotiations on Monday, August 4, in San Francisco

Carload volumes were up 7.6 percent at 299,256, topping the week ending January 12 at 290,607 and the week ending July 5 at 270,731.

U.S. companies made only marginal improvements in their ability to collect from customers and pay suppliers in 2013, while showing no improvement in how well they managed inventory, according to the 16th annual working capital survey from REL a division of the Hackett Group, Inc.

Study suggests solutions for filling the talent gap, including the development of robust ties with the education system.

The Department of Transportation’s Bureau of Transportation Statistics (BTS) reported this week that U.S. trade with its North America Free Trade Agreement (NAFTA) partners Canada and Mexico increased 5.4 percent from May 2013 to May 2014 at $103.9 billion.

Comments

Post a comment
Commenting is not available in this channel entry.